CD Series Vertical Lifting Clamps（DSQ model）

1. The universal vertical CD clamp is designed to ensure that the load can be lifted and turned (180°). Whilst at the same time ensuring that the load is positively retained.

2. These clamps have a wide range of uses and are particularly suited for the lifting and turning of steel plates, ship sections and the extraction of pile sheets.

3. Fitted with a hinged hoisting eye moving in all directions so as to enable the user to place and lift the load from any directions.

4. Clamps are fitted with special hook-up facilities to enable easy fitment of the clamp in horizontal position.

5. The new models have a greater jaw aperture enabling plates of varying thickness to be lifted with the same clamp.

6. The clamp is fitted with a safety latch which ensures the proper use by means of a double locking device, both in open as well as closed position.

7. This also guarantees a pre-load on the material being lifted.

8. The clamps are suitable for surface hardnesses up to 37 RC (345HB ). Small overall dimension with a relatively high lifting capacity.

9. Overall forged structure with good traceability and the safety factor of 6 times.

Working Load Limit (WLL) for loading capacity please consult diagram as above